Welcome to the official website of Guizhou Hongen Automation Technology Co., Ltd.!
Press-Fit Tight-Edge Assembly System
1. Manually place the cartridge case into the crimping die, then position the bullet above the case using the flexible gripper for assembly. 2. Once crimping is complete, the assembly module advances; the flexible gripper automatically opens, releasing the bullet, which then moves to the crimping station. 3. The servo electric cylinder continues to descend, compressing the crimping spring and causing the crimping die petals to close inward, thereby performing the crimping operation on the product. 4. Upon completion of crimping, the servo electric cylinder returns upward to its ready-to-operate position. 5. When crimping is finished, an audible and visual alarm is triggered, prompting the operator to remove the finished product and reset the equipment to its initial state at all stations.
Category:
Product Center
Device functions:
1. Manually place the case into the crimping die for the base, then insert the bullet from above the flexible gripper into the upper part of the cartridge case for assembly.
2. Once the lamination is complete, the module moves forward, causing the flexible gripper to naturally open and release the projectile, which then moves to the crimping station.
3. The servo electric cylinder continues to move downward, compressing the tightening spring and causing the tightening die petals to retract, thereby performing the tightening operation on the product.
4. Immediately complete the upward reset of the servo electric cylinder to the ready-to-operate position.
5. Upon completion of the import process, an audible and visual alarm will be triggered to alert operators to manually remove the tightly sealed finished products and reset the equipment to its initial state at all workstations.
Previous Page
Previous Page
Contact Us
No. 397, Baiyun Road, Baiyun District, Guiyang City, Guizhou Province
WeChat Official Account
TikTok account
